McCalls 6569: Anniversary Evening Dress (The Finished Dress)

If you’ve read my previous blog you’ll see how my muslin turned out.

With just a week to go I set out to sew up my dress in the lovely gold satin I’d brought back from Vegas a couple of years ago. I read prior to this that you should try and store your satin rolled rather than folded due to the crease factor. I did this but to be honest it still creased a fair amount.

I spent a whole night cutting out and marking up the pattern pieces (including the adjusted pieces – see my other blog). My, my, what a pain in the arse. It turns out satin is the most slippery material known to man (slight exaggeration, but it did feel like that at the time).

IMG_20170126_212414_336

The following day I sewed the bodice together which went very well but then it was time for the lining. I should say at this point I have never lined anything in my life but as I was sewing with satin I thought it would probably be a good idea just to bit the bullet and do it. IMG_20170127_212641_438

I decided this before I read the pattern instructions, but it turned out that there were instructions in with the pattern to line the dress. My Brain: “What does this even mean though?!”

IMAG2521

I spent about an hour trying to figure out how to sew the lining in, which way it went round to ensure the seams couldn’t be seen. I have to say – vintage instructions are not a dyslexic’s  friend the best of times and this was no exception. After lots of umming and ahhhing and tearing my hair out I finally figured it out and it did actually look pretty good. IMAG2530

IMAG2531 IMAG2532

I spent a long night sewing the lining to the skirt pieces following this, and here was where I made one of my major mistakes. I have no idea how I marked the fabric up wrong but somehow I managed to.

IMG_20170130_210751_879

When it came to the later stage of sewing it together it meant that I had a row of stitching down the back of the skirt next to the centre seam which I then had to unpick. Unfortunately, as I was sewing in satin it did mark the fabric so my dress is not so perfect, but we make mistakes to learn from them don’t we? More on that point later! IMAG2573

With a day to go to my anniversary (and after a lengthy trip to the dentist for two fillings) I spent a full day sewing the skirt pieces together (while keeping an eye on the clock so I could be sure I wouldn’t be late picking up Ash from nursery and hoping that some semblance of feeling would return to my ridiculously numb face).

I attached the skirt to the bodice with relative ease and inserted the zip. Mistake number two: I was silly enough to not check that the fabric was taught when I basted the zip in, meaning that when I went to sew it I, again, had a big chuck of stitches to unpick which left a rather messy side zip insertion.

IMAG2571 IMAG2572

Thankfully it’s a side zip so really no one’s going to see it unless the come up really close to have a look . I finished sewing the lining pieces together at the waist and was quite impressed with how it looked inside out.

At this point I thought I should just leave the hemming to my anniversary and cut my losses before I cried.

So the day of my 10th wedding anniversary (last Friday) I sewed right up to the last minute but I did finally finish my dress with a couple of hours to spare, and I did get all dressed up and we did go out for the first time on our own in seven months. And here I am in my dress!

IMAG2584 2017-02-11_05-03-32

So what did I learn?

  • I learnt that sewing to a deadline when you have a young baby may not be the right amount of pressure to put on yourself when you’ve just gone back full time to work!
  • I learnt that even with nearly a year off sewing anything I’m still quite competent and I still know what I’m doing.
  • I learnt that lining something may be a pain in the arse but it’s really worth it and that there’s nothing to be scared about when it comes to what I would have previously considered tricky fabric.
  • Mostly I learnt that there’s nothing wrong with mistakes and everything can;t be perfect all of the time. I wish I didn’t have the little hole marks where I’ve unpicked the stitching but it will always be a reminder of the first time I sewed with something other than what I previously considered ‘safe’ fabrics and I certainly wont be making the same mistakes again. We’ve got to get some things wrong to learn a lesson, right?

Overall I am extremely happy with how it turned out. What do you think?

So roll on 2017….I still have some glitter speckled pink satin from Vegas in my stash…watch this space!

McCalls 6569: Anniversary Evening Dress (The Muslin)

This year I made a decision, a decision not be to scared by fabric. For a couple of years now I’ve had some gold satin I brought back from Vegas in my stash and I’ve been so scared to use it having never worked with anything like that. This year it’s my tenth (?!) wedding anniversary and I thought it would make the loveliest dress for our celebratory meal out.

I picked McCalls 6569 for the pattern; a gorgeous sixties evening dress with a matching jacket. I’m not so sure I’ll have time to make the jacket but the dress looked simple enough with my time constraints.
IMG_20170101_203502_925

The first thing I did was post in the We Sew Retro Sew & Tell facebook group to ask for tips, it’s one thing I LOVE about the sewing community, you have a wealth of experience and advice online in a group like that and people are only willing to help and wish you luck. So armed with my new found advice I bit the bullet and cracked on. As you may have noticed I don’t often make muslins of my clothes but as I was working with an unforgiving fabric I thought I probably should get it right the first time, as a seam ripper might not be the best friend it previously had been to me. I measured up, perfect in the bust but 2 inches bigger on the waist and 4 on the hips (not live I’ve had a baby in the last year or anything….). It was going to need a little adjustment.

IMG_20170114_201248_078

I used the pivot method for the hip adjustment and added extra at the waist thinking I could figure out adjusting the darts as I went.

IMG_20170115_172435_036 IMG_20170115_173408_030

New pattern pieces made, I cut and marked everything out in calico, ready to sew my mock up. Well this is where everything went quiet for a week as my little one ended up being ill, so it’s meant that every night for the last week I’ve been furiously sewing to get everything completed after his bed time.

The muslin went together bit by bit and I was overall quite happy with how it turned out…. apart from ordering an open ended zip (I blame the lack of sleep) and I forwent the hemming as that can be done on the real thing later.

IMG_20170122_204456_197 IMG_20170123_213026_773
IMAG2518 IMG_20170125_204847_210
The only other thing (that I am slightly concerned about) is lining the dress. There are instructions but having never lined anything before I’m hoping that it’s easy enough and wont take up too much time as I’ll probability be sewing right up until the last minute with this.

So here it is muslin complete and on to the real thing – wish me luck!

Simplicity 1360: All Sewn Up – 70s Inspired Gold Maternity Gown

For my first sew of the year I decided on adapting this new maternity pattern to make a vintage style outfit.

IMG_20160111_200825

That’s correct, if you don’t follow me on Instagram then you might not have seen that I’m preggo, up le duff, got a bun in the oven etc.

IMG_20160131_095754

I am not going to go all modern, I have picked up a few vintage patterns and my friends have loaned me some so there will be vintage maternity wear being made at some point but I thought it would be quite interesting to see how they compared against modern ones to make up.

Thinking along the lines of “if I lengthen this dress and make it glitzy it could totally look 70s disco-a-go-go” I opted for buying in a boatload of gold lame, without really thinking of the consequences.

Namely that lame is a bitch to sew.

While I was waiting for it to arrive I finally managed to clear out my lovely little sewing space in our dining room and started to read through the instructions (I also put a load of my spare vintage patterns on ebay if you fancy a look).

IMG_20160130_091958

Which made no sense. How confusing is this? (or at least how confusing does my dyslexic brain want it to be).

edited_IMG_20160113_202227

I put my faith in the pattern and hoped when I cut the pieces out it would make more sense.

When the lame arrived I fell in LOVE, It is sooooo beautiful and undeterred I set about lengthening the pattern and cutting the extension pieces out (excuse the slippers).

IMG_20160118_172117
IMG_20160118_180806
IMG_20160119_182413


I ran a few pieces through the machine to see what the fabric was like to sew. This did not go well. Now, I have always been told to use a zig zag stitch for stretch fabrics (I don’t own an overlocker) but this didn’t work.

After a stressful and annoying night I managed to get the front of the dress completed but only after a lot of turning the air blue and wondering why in the hell it wouldn’t sew like it was meant to.

Truth is, I’m still not sure – is it because the weight of the fabric is too heavy, so it’s not your typical stretch? (If anyone does know please tell me!).

The front knot part actually was pretty easy after I had the pieces in front of me – funny, it’s never the thing that you think is going to cause trouble that does, is it?

edited_IMAG0183

I sewed up the two back pieces and put the neck facing in and by this point I had opted to go for a straight stitch as it appeared to be working much better than zig zag and wasn’t making me want to cry. Damn the consequences.

What was the worst that couple happen? I could spend hours unpicking it when it didn’t hang or stretch properly? (yes….yes that is what could happen).

IMAG0210_1

The sleeves, I decided, would be sewn in the cheat’s way as the fabric was so tricky.

Rather than sew them up then set them in, I sewed them into the arm holes without the sleeve seam sewn up, then sewed the seam of the sleeve at the same time as the side seams of the dress (try saying that quickly!).

I have to say, when they were in, it looked pretty good.

edited_IMAG0215
IMAG0219

I tried it on. It looked good, it actually stretched the way it was meant to (thank the sewing Gods) so I could fit it over my ever expanding bosom and tum.

Now all I had to do was hem the sleeves and the dress, which turned out to be not that challenging, With the aid of clips (and pegs) I managed to get the length more or less right the first time. I only needed to adjust it slightly and once sewn up I was ready to go.

So here I am in all my shiny gold disco glory, pretty happy with how it’s turned out, even if I do look like a preggo space babe from the future.

Gold Maternity Dress
Gold Maternity Dress
Gold Maternity Dress